Determining Tonnage
These reference charts will help you determine the required tonnage for a range of hole sizes through different material thicknesses.
Punch or Press
The following information will assist in determining which capacity tool will work best for your application.
Die Clearance
The clearance on the die will affect the end result of the punching application; this will help determine if a special clearance is needed.
Shears
Adding shear to a punch could help make the punching application easier; this information explains when adding shear is necessary.
Roll Charts
These reference charts show examples and roll descriptions for our current beading and crimping tools.
Technical Assistance
Reference charts may help you find what you’re looking for. If you have technical questions about hand tools or larger equipment, you’re welcome to start give us a call at 815-962-3011.
