Benders
Showing all 9 results
No. 455 Combination Angle Iron Shear, Notcher, Bender
$3,275 + Freight
The No. 455 is a must whenever angle iron is fabricated. It consists of No. 4 Angle Iron Shear, No. 50 Angle Iron Notcher and No. 51 Angle Iron Bender, all mounted on a sturdy work station. 72″ operating bar handle included. This all in one unit ideal for use on a job site, mounted in the back of a truck, or used in a job shop.
CB3020 Cleat Bender- 30” 20GA
$1,650 + Freight
The CB3020 cleat bender is a manually operated tool that form uniform drive cleat edges on rectangular ductwork in seconds without set-up or adjustment. The upper handle forms the cleat and the lower handle opens the tool for easy removal of the material. Heavy cast iron and fabricated steel construction provides long life and trouble-free operation.
CH2420 Cheek Bender
$1,010 + Freight
The CH2420 cheek bender is a rugged tool built for increased productivity while getting the most consistent bends quickly. This model’s two-way trunnion design holds the bending apron steady at the base of the bend ensuring accuracy throughout the length of the sheet. To change the flange height, the shims are set at the factory to run a flange of 3/16 inch. This dimension can be changed in the following manner: remove t 4 hex bolts on the top plate and change to desired dimension. The adjustable shim will give a range or 3/16 to 5/16 of an inch. This procedure may be done on left and right top plates if desired.
No. 51 Angle Iron Bender w/Handle
$975 + Freight
The No. 51 angle iron bender is a companion tool to the No. 4 angle iron shear and No. 50 angle iron notcher. It will bend all sizes of angle iron within the rated capacity as well as flat bar. It includes a 32″ operating bar handle.