| Punching > Lever Press |
This lever press provides power press capacity with manual press
economy for prototype and short run work. Their large throat openings accommodate a wide
variety of part sizes and shapes.
- Maximum Rated Capacity:* 8 tons
- Linear Actuation
- Standard and deep throat models
* Refer to the tonnage chart
to determine if the rated capacity of this tool will accommodate the type and thickness of
metal and the size and shape hole that you will be punching. Do not, under any condition,
exceed the rated capacity of this tool. |
 |
Auxiliary Attachments
Dimensions
|
Reference |
IN. |
MM. |
| A |
44 |
1117.6 |
| B |
48 |
1219.2 |
| C |
24 |
609.6 |
| D |
6 |
152.4 |
| E |
4 |
101.6 |
| F |
18 |
457.2 |
| Reference |
IN. |
MM. |
| Throat height at ram |
10 |
254.0 |
| Throat depth, No. 34 |
24 |
609.6 |
| Length of stroke |
1 |
25.4 |
| Ram adjustment |
3/4 |
19.05 |
Bed plate holes
(C to C) |
6 3/4 |
171.45 |
| Dia. of punch shank
hole in ram |
1 |
25.4 |
| Depth of punch shank
hole in ram |
1 1/4 |
31.75 |
| Slug clearance |
3 x 5 |
76.2 x 127.0 |
|
 |
Ordering Guide
| Description |
Catalog No. |
Weight (Lbs.) |
| No. 34 Lever Press* |
132040340 |
770 |
| F8 Punch holder |
136122808 |
2 |
| F28 Punch holder |
136132828 |
2 |
| No. 20 Die adapter |
136313020 |
2 |
| No. 40 Die adapter |
136323040 |
1 |
| No. 10 Die shoe |
139541010 |
15 |
| No. 20 Die shoe |
139552020 |
16 |
| F2 3/4 Die shoe |
139404030 |
8 |
| F3 3/4 Die shoe |
139415050 |
9 |
| F4 3/4 Die shoe |
139426060 |
14 |
| Stripper arms (2) |
233940003 |
3 |
| Stripper plate: |
| A7 (1/2" max. punch) |
332200500 |
2 |
| B7 (1" max. punch) |
332201000 |
2 |
| C7 (2" max. punch) |
332202000 |
3 |
| D7 (3" max. punch) |
332203000 |
3 |
| E7 (4" max. punch) |
332204000 |
3 |
| Gauge work table |
137000320 |
18 |
|
* Includes standard equipment: Side gauge, depth gauge,
one F8 and F28 punch holder, one No. 20 and No. 40 die adapter, F2 3/4" die shoe, one
1/2" round punch and die, one set stripper arms, A7 stripper plate, and 48" bar
handle. |
Punches and DiesOrder
additional punches and dies from Roper Whitney.
Typical Size Ranges
| |
Type O |
Type M |
Type N |
Type P |
Type R |
Type S |
Type T |
Type D |
| No. 32 & 34 |
1/8 -
4 |
1/8 x 3/16 -
3 x 3 3/4 |
1/8 x 3/16 -
2 x 3 1/4 |
1/8 x 3/16 -
3 x 3 3/4 |
1/8 -
2 5/8 |
5/32 -
1 1/2 |
5/32 -
1 1/4 |
5/32 x 1/8 -
4 x 3 7/8 |
|
Roper Whitney of Rockford, Inc., 2833 Huffman Blvd., Rockford, IL 61103, PH: 815.962.3011 FAX: 815.962.2227 EMAIL: info@roperwhitney.com
Roper Whitney, and Pexto logos are trademarks of Roper Whitney of Rockford Inc. All rights reserved.
|
 |
