Roper Whitney Bending Brakes
  • No. 455
  • No. 4
  • No. 50
  • No. 51

Combination Angle Iron

Angle Iron Shear

The No. 4 Angle Iron Shear is offered with three types of shear blades; standard, contour and special. The standard blades are installed at the factory and all No. 4 shears are shipped with these blades. The contour and special blades must be purchased separately and installed by the user. The same base shearing die can be used with all three shear blades.

Note: Shearing 2” x 2” x 1/8” angle without distortion requires a special blade which also cuts other sizes as shown for contour blade.

Since the extreme capacity of this tool is accomplished by a shearing action, there is a bending out or distortion of one leg of the angle iron when using the standard movable shear blade. To avoid this distortion, a contour moveable shear blade is offered to cut 1/2” x 1/2” x 1/8” to and including maximum contour capacity of 2” x 2” x 3/16”.

Angle Iron Notcher

The No. 50 Angle Iron Notcher is a useful tool for notching or coping angle iron. It can be used in the shop or on the job site, Coping and special degree notching blade and dies are available.

Combination Angle Iron Shear, Notcher and Bender

This entire unit is a must whenever angle iron is fabricated. Consists of No. 4 Angle Iron Shear, No. 50 Angle Iron Notcher and No. 51 Angle Iron Bender… all mounted on sturdy floor. 72-Inch operating bar handle is furnished.

Additional Photos & Video: (click to enlarge)

Angle Iron Tools Specifications No. 4 Angle Iron Shear No. 50 Angle Iron Notcher No. 51 Angle Iron Bender No. 455 Combination
Maximum shearing capacity, mild steel 2” x 2” x 1/4” 2” x 2” x 1/4” 2” x 2” x 1/4” 2” x 2” x 1/4”
Height 10” 12” 5” 33”
Length 13-1/2” 13” 15”  
Width 7" 9-1/2" 10"  
Floor Space Required       21-1/2” x 26”
Shipping Weight 49lbs. 55lbs. 50lbs. 200lbs.
Ordering Guide Catalog No. Shipping Weight
No. 4 Angle Iron Shear w/Standard Blade & 72” Handle
No. 4 Standard Replacement Blade
No. 4 Special 2”x2”x 1/8” Replacement Blade
No. 4 Base Replacement Blade Set
No. 50 Angle Iron Notcher w/Standard Equipment
No. 50 90 Degree Upper Blade
No. 50 90 Degree Lower Blade
No. 51 Angle Iron Bender w/Handle 168070510 50
No. 455 Combination Bender/Shear/Notcher w/Handle & Floor Stand 141034550 200